Guide top › Steels › VG-10 — the stainless standard
VG-10 — the stainless standard
V金10 (VG-10) — VG-10 is Takefu Special Steel's stainless blade steel and the core of countless damascus knives. Takefu publishes its composition (1.00% carbon, 15% chromium) and a hardening hardness of HRC 60 or more.
Maker-published figures. Bars show the published value or range for each element.
| Record type | Steel |
|---|---|
| Origin | Takefu Special Steel, Echizen, Fukui |
| Japanese name | V金10 (V-gold 10) |
| Steel family | Stainless steel |
| Maker | Takefu Special Steel Co., Ltd. |
| Composition | C 1.00%, Cr 15.00%, Mo 1.00%, V 0.25%, Co 1.55% (Takefu published data) |
| Hardness | Takefu hardening hardness: HRC 60 or more. Finished knives typically 60–61 HRC, varying by maker |
Developed by Takefu Special Steel in Echizen, VG-10 balances hardness, corrosion resistance and sharpenability so well that it became the default core steel for mid-range and premium Japanese knives. Takefu's published figures: carbon 1.00%, chromium 15.00%, molybdenum 1.00%, vanadium 0.25%, cobalt 1.55%, with hardening hardness of HRC 60 or more; finished knives usually run 60–61 HRC depending on the maker. It is most often seen as the hard core of layered (san-mai) and damascus blades.
Ask what steel a good mid-priced Japanese knife uses and the answer is VG-10 more often than not. It earned that position by having no serious weakness.
A balanced recipe
The cobalt and molybdenum support hardness and edge stability at 15% chromium, so the steel is properly stainless while still hardening beyond HRC 60 — a combination older stainless grades could not manage.
Takefu, in Echizen, also pioneered the clad-metal production that sandwiches a VG-10 core between patterned layers; most 'damascus' knives on the market are built exactly this way, with VG-10 doing the cutting.
Sharpening and use
VG-10 sharpens on ordinary water stones without drama and holds a working edge far longer than AUS-8-class steels. It is the reference point against which both cheaper stainless and premium powder steels are compared in the comparison pages of this guide.
Read alongside
Sources
- What is the difference between VG10 and SG2? — Knives and Stones (summarising Takefu's published data) — Takefu-published composition and hardness for VG10 and SG2, as summarised by a specialist retailer
- VG-10 — Wikipedia (English) — VG-10 steel and its use in knives
Record source: Wikipedia (English). Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.