Guide top › Steels › SG2 (SPG2) — Takefu's powder stainless
SG2 (SPG2) — Takefu's powder stainless
粉末ハイス鋼 SG2 / SPG2 — SG2 — Takefu writes it SPG2, 'Super Gold 2' — is a powder-metallurgy stainless steel. Takefu does not publish its composition and gives its hardness as HRC 62 or more; finished knives run about 61–64 HRC depending on the maker. The same steel family is sold by Kobe Steel as R2.
Takefu does not publish SG2's composition. The bars show Kobe Steel's published ranges for the equivalent R2 grade.
| Record type | Steel |
|---|---|
| Origin | Takefu Special Steel, Echizen, Fukui |
| Japanese name | 粉末ハイス鋼 SG2 (SPG2, Super Gold 2) |
| Steel family | Powder-metallurgy stainless steel |
| Maker | Takefu Special Steel Co., Ltd. (equivalent grade sold by Kobe Steel as R2) |
| Composition | Not published by Takefu. Kobe Steel's published data for the equivalent R2 grade: C 1.25–1.45%, Cr 14–16%, Mo 2.3–3.3%, V 1.8–2.2% |
| Hardness | Takefu: HRC 62 or more. Finished knives typically 61–64 HRC, varying by maker |
Powder metallurgy lets SG2 carry more carbon and alloy than a conventional stainless while keeping carbides fine and even, so the steel is both harder and tougher than its numbers suggest. Takefu positions SG2 above VG-10 for edge retention. Because Takefu does not disclose the composition, the figures often quoted for SG2 (carbon 1.25–1.45%, chromium 14–16%, molybdenum 2.3–3.3%, vanadium 1.8–2.2%) come from Kobe Steel's published data for R2, the equivalent grade — this guide attributes them that way rather than presenting them as Takefu data.
SG2 is the steel premium Japanese knives converged on: stainless, very hard, and — thanks to powder metallurgy — not brittle about it.
Why powder matters
In conventional steelmaking, high carbon plus high chromium grows large, brittle carbides. Atomising the melt into powder and consolidating it keeps the carbides microscopic and evenly spread, so SG2 can be both harder than VG-10 and fine-grained enough to take a thin edge.
Takefu calls SG2 a powdered stainless high-speed steel and rates it HRC 62 or more. Individual makers choose where in the low-to-mid 60s to run it, trading a little edge life for toughness or the reverse.
SG2 or R2?
Knives are sold as both SG2 and R2. The names come from the two mills: SG2 (SPG2) is Takefu's brand; R2 is Kobe Steel's brand for the equivalent powder grade. This guide treats them as the same steel family and says which mill's data a figure comes from.
Read alongside
Sources
- What is the difference between VG10 and SG2? — Knives and Stones (summarising Takefu's published data) — Takefu-published composition and hardness for VG10 and SG2, as summarised by a specialist retailer
- Yoshimi Kato SG2 Minamo — Knives and Stones — SG2 hardness (HRC 62 or more, Takefu) and composition non-disclosure
Record source: Knives and Stones (summarising Takefu data). Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.