Guide top › Steels › VG-1 — the first V-Gold steel
VG-1 — the first V-Gold steel
V金1 (VG-1) — VG-1 is Takefu Special Steel's original V-Gold stainless steel, the predecessor of VG-10. Summaries of Takefu's published data list 1.00% carbon and hardening hardness around HRC 60–61 or more.
Maker-published figures. Bars show the published value or range for each element.
| Record type | Steel |
|---|---|
| Origin | Takefu Special Steel, Echizen, Fukui |
| Japanese name | V金1 (V-gold 1) |
| Steel family | Stainless steel |
| Maker | Takefu Special Steel Co., Ltd. |
| Composition | C 1.00% (as listed in summaries of Takefu's published data); full composition not reproduced here |
| Hardness | Hardens to about HRC 60 (specialist guide); Takefu data summaries give HRC 61 or more |
Before VG-10 there was VG-1: Takefu's first 'V-Gold' stainless blade steel, still used in some knife lines. It hardens to about HRC 60, takes a good edge and resists rust, but VG-10's refined composition improved on it in hardness and edge retention, which is why VG-10 became the famous one. VG-1 appears mainly in established Seki and Sakai lines where its behaviour is well understood.
VG-1 is the older brother: respected, still working, and permanently in VG-10's shadow.
The start of the V-Gold line
Takefu built its stainless reputation on the V-Gold series. VG-1 proved a Japanese stainless steel could harden to around HRC 60 and hold a serious edge; VG-10 then improved the recipe with cobalt and molybdenum adjustments.
Because VG-10 exists, VG-1 is now a value and tradition choice rather than a flagship — perfectly serviceable, rarely the headline.
- Takefu's own English datasheet for VG-1 was not directly retrieved; figures follow specialist summaries of Takefu's published data.
Read alongside
Sources
- Steel Guide — Knives From Japan — Specialist steel guide covering VG-1, AUS-8, AUS-10, Ginsan and ZDP-189
- VG1, VG2, VG5, VG10 and SG2 Stainless Steel by Takefu Special Steel — Goodpic — Takefu V-Gold family data as summarised: VG1 carbon 1.00%, HRC 61 or more
Record source: Knives From Japan steel guide. Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.