Japanese Knives & Blade Towns

Guide top › Steels › AUS-10 — the step up from AUS-8

AUS-10 — the step up from AUS-8

AUS-10 — AUS-10 raises the AUS recipe to about 1.1% carbon, hardening to roughly 59–60 HRC. It keeps the series' easy maintenance while holding an edge noticeably longer than AUS-8.

Composition at a glanceCarbon1.1%

Maker-published figures. Bars show the published value or range for each element.

Record typeSteel
OriginAichi Steel, Japan
Japanese nameAUS-10
Steel familyStainless steel
MakerAichi Steel Corporation
CompositionC about 1.1% (grade data); chromium and molybdenum/vanadium additions as per the AUS series
HardnessHardens to about 59 HRC and above; finished knives typically 59–60 HRC

Aichi Steel's AUS-10 is the top of the common AUS grades: about 1.1% carbon with chromium around 13–14.5% and molybdenum/vanadium additions. Finished knives typically run about 59–60 HRC, between AUS-8 and VG-10 in both edge life and sharpening effort. Sakai and Seki lines use it for mid-priced damascus and monosteel knives where VG-10 would raise the price.

AUS-10 is the quiet middle option: meaningfully better edge life than AUS-8, still easy to live with, still affordable.

Where it sits

The extra carbon over AUS-8 buys hardness around 59–60 HRC, which shows up directly as longer intervals between sharpenings. Sharpening remains straightforward on standard water stones.

Against VG-10 it gives up some hardness and a little corrosion margin; against AUS-8 it asks slightly more money. Makers choose it for the middle of their ranges.

What remains open

Read alongside

AUS-8VG-10VG-1

Sources

Record source: Knives From Japan steel guide. Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.