Japanese Knives & Blade Towns

Guide top › Steels › AUS-8 — the everyday stainless

AUS-8 — the everyday stainless

AUS-8 (モリブデンバナジウム鋼) — AUS-8 is Aichi Steel's workhorse stainless: about 0.75% carbon, hardening to roughly 58 HRC. It is easy to sharpen, properly rust-resistant and inexpensive — the steel of countless honest kitchen knives.

Composition at a glanceCarbon0.75%

Maker-published figures. Bars show the published value or range for each element.

Record typeSteel
OriginAichi Steel, Japan
Japanese nameAUS-8
Steel familyStainless steel
MakerAichi Steel Corporation
CompositionC about 0.75%, with molybdenum and vanadium additions (grade data)
HardnessHardens up to about 58 HRC; finished knives typically 57–59 HRC

The AUS series comes from Aichi Steel, and the number tracks carbon content: AUS-8 sits in the middle at about 0.75% carbon, with molybdenum and vanadium additions for edge stability. It hardens to around 57–59 HRC — softer than VG-10 — so edges roll sooner but also restore in seconds on a stone or steel. For busy kitchens and first Japanese knives, that trade is often the right one, and Seki's factories build enormous numbers of AUS-8 knives.

Not every knife needs to be a thoroughbred. AUS-8 is the reliable daily driver of Japanese stainless steels.

Softness as a feature

At around 58 HRC an AUS-8 edge bends rather than chips and comes back with a few passes on a honing rod or stone. In a shared or commercial kitchen, that resilience beats a harder steel's fragility.

The limits are equally real: the edge dulls faster than VG-10's, and fine slicing performance fades sooner. Price and forgiveness are the AUS-8 proposition.

Read alongside

AUS-10VG-10Seki

Sources

Record source: Knives From Japan steel guide. Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.