Guide top › Steels › Shirogami — white paper steel
Shirogami — white paper steel
白紙 (shirogami) — Shirogami is Proterial's (formerly Hitachi Metals) purest carbon steel, made at Yasugi from high-purity iron. It takes the finest edge of the common knife steels and is the easiest to sharpen — but it rusts, and it asks for care.

Maker-published figures. Bars show the published value or range for each element.
| Record type | Steel |
|---|---|
| Origin | Proterial (Hitachi Metals), Yasugi Works, Shimane |
| Japanese name | 白紙 (shirogami) — 'white paper' steel |
| Steel family | High-carbon steel (non-stainless) |
| Maker | Proterial Ltd. (formerly Hitachi Metals), Yasugi Special Steel (YSS) |
| Composition | Carbon by grade — No.1: 1.25–1.35%, No.2: 1.05–1.15%, No.3: 0.80–0.90%; alloying elements minimal (maker data) |
| Hardness | Varies by grade and maker; finished knives commonly around 60–64 HRC |
The 'white paper' name comes from the colour of the maker's label. Shirogami is essentially iron and carbon with impurities kept extremely low: grade No.1 carries 1.25–1.35% carbon, No.2 1.05–1.15%, No.3 0.80–0.90%. With so little alloying, the steel's fine grain sharpens quickly to an extremely keen edge on water stones, which is why traditional single-bevel knives are so often made from it. Finished hardness depends on the grade and the maker, commonly around 60–64 HRC. It is a carbon steel: it will rust and patina if left wet.
Shirogami is the steel sharpeners love. Nothing common takes a finer edge with less work — and nothing common punishes a wet, forgotten blade faster.
Purity as a design choice
Yasugi steelmaking grew from the tatara tradition of smelting iron sand. Shirogami keeps that purity: carbon and iron, with phosphorus and sulphur held to very low levels and no deliberate chromium or tungsten. The result is a fine, even grain structure.
The three grades are a carbon ladder. No.1 is the hardest and most demanding to forge and heat-treat; No.2 is the most widely used; No.3 gives up edge life for toughness and ease.
In the kitchen
Shirogami sharpens fast on water stones and reaches an edge fineness that alloyed steels struggle to match, which is why it dominates traditional yanagiba, deba and usuba. The trade is maintenance: the blade must be dried after use, and a patina (or rust, if neglected) is part of ownership.
Hardness figures quoted for shirogami knives are the knife maker's result, not the steel mill's guarantee — heat treatment moves the number by several points.
Read alongside
Sources
- Yasugi steel (Yasuko) — Wikipedia (Japanese) — Yasugi special steels including the white and blue paper grades
- Shirogami (White) and Aogami (Blue) Steel — Goodpic (summarising Proterial data) — Grade-by-grade carbon contents for white and blue paper steels
- White Steel vs Blue Steel: Shirogami vs Aogami Explained — Japan Knife Makers — Comparison of white and blue steel grades, compositions and typical hardness ranges
Record source: Wikipedia (Japanese). Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.