Guide top › Steels › Aogami — blue paper steel
Aogami — blue paper steel
青紙 (aogami) — Aogami starts from shirogami's purity and adds small amounts of chromium and tungsten. The edge lasts longer and the steel is a little more forgiving, at the cost of slower sharpening. Still a rust-prone carbon steel.
Maker-published figures. Bars show the published value or range for each element.
| Record type | Steel |
|---|---|
| Origin | Proterial (Hitachi Metals), Yasugi Works, Shimane |
| Japanese name | 青紙 (aogami) — 'blue paper' steel |
| Steel family | Alloyed high-carbon steel (non-stainless) |
| Maker | Proterial Ltd. (formerly Hitachi Metals), Yasugi Special Steel (YSS) |
| Composition | No.1: C 1.25–1.35%, Cr 0.3–0.5%, W 1.5–2.0% · No.2: C 1.05–1.15%, Cr 0.2–0.5%, W 1.0–1.5% (maker data) |
| Hardness | Varies by grade and maker; finished knives commonly around 61–65 HRC |
Proterial's blue paper steel (the label is blue) alloys the white-steel base: grade No.1 carries 1.25–1.35% carbon with 0.3–0.5% chromium and 1.5–2.0% tungsten; No.2 carries 1.05–1.15% carbon with 0.2–0.5% chromium and 1.0–1.5% tungsten. The tungsten carbides improve wear resistance and edge retention over shirogami. Finished knives commonly run about 61–65 HRC depending on grade and maker. Like shirogami it is not stainless and will patina or rust without care.
If shirogami is purity, aogami is purity plus a plan: two alloying elements bought longer edge life without giving up the Yasugi character.
What the alloys change
Chromium at these low levels is not there for rust resistance — aogami still rusts. With tungsten it forms hard carbides that resist abrasion, so the edge dulls more slowly through a service or a day of prep.
The cost shows at the whetstone: aogami takes longer to raise a burr and to polish than shirogami, which is why sharpener preference often decides between them.
Grades
No.2 is the benchmark grade, balancing hardness and workability; No.1 pushes carbon and hardness higher for makers confident in their heat treatment. Above both sits Aogami Super, which adds molybdenum and vanadium and is covered in its own record.
Read alongside
Sources
- Yasugi steel (Yasuko) — Wikipedia (Japanese) — Yasugi special steels including the blue paper grades
- Shirogami (White) and Aogami (Blue) Steel — Goodpic (summarising Proterial data) — Grade-by-grade carbon and alloy contents
- White Steel vs Blue Steel: Shirogami vs Aogami Explained — Japan Knife Makers — White vs blue comparison with compositions and typical hardness ranges
Record source: Wikipedia (Japanese). Text is original to this guide, written from the cited sources. Wikipedia material is used under CC BY-SA. Official, association and maker pages were used for facts and figures only; no text or photographs were copied from them.