Ōdate magewappa
An Ōdate magewappa container makes sense once you separate its wall from its base: the curved wall is a thin cedar board, softened, bent and sewn — not a shape hollowed out of a block. The visible cherry-bark stitches are only part of the joint.
A wall made by bending
Ōdate Kōgeisha describes thin cedar components softened in hot water, bent around a form and dried. The ends are joined and stitched with cherry bark, and a base is fitted afterwards. Aoyama Square's production account adds that the ends of the thin board are tapered before joining, with adhesive at the overlap as well as bark stitching — so the stitches are not the complete explanation of the joint. Akita Prefecture's account separates bending, drying, joining and base fitting into successive stages, and identifies forms beyond lunch boxes, including trays and cups.
Sources: Ōdate Kōgeisha: Magewappa construction and care · Japan Traditional Crafts Aoyama Square: Ōdate magewappa
Start with the direction of the grain
Maker Shibata Yoshinobu Shōten explains masame, the straight grain associated with these boards, through the direction in which timber is cut: cutting close to perpendicular to the growth rings produces comparatively straight, parallel lines on the board face, while a more tangential cut gives a curved pattern. The lines on a finished wall are therefore evidence of material selection, not a pattern added afterwards.
Reading a magewappa vessel
Look at how the ends meet at the seam, then at the fit of the base, then at the grain direction on the wall. Care follows the maker's instructions — Ōdate Kōgeisha distinguishes the care of its general magewappa from lacquered variants — so construction alone does not settle how a piece should be washed or stored. This record was promoted from this site's editorial guide “Odate Magewappa: How a Straight Cedar Strip Becomes a Vessel”, linked in both directions.
Editorial sources, scope and rights
The English reading guide and its stated sources only. Original source dates, rights, identity limitations and live-status fields remain separate.
Original GIZUMO editorial text and limited factual paraphrase. Linked reference pages retain their own rights; the source-data licence below does not license their text or images. No source photographs are reproduced on this page.
- Wikidata contributors · Structured CC0 metadata; selection/categories by GIZUMO
Identity, designation class and factual fields in the preserved dated source record; no new live-status verification
- Ōdate Kōgeisha: Magewappa construction and care
Hot-water bending, cherry-bark stitching, base fitting and care distinctions, as cited by this site's editorial magewappa guide.
- Japan Traditional Crafts Aoyama Square: Ōdate magewappa
Production-process and materials account by the national traditional-crafts centre.
Preserved source record and metadata
Ōdate magewappa (大館曲げわっぱ) is a bentwood craft of Ōdate, Akita Prefecture. Thin straight-grained cedar components are softened in hot water, bent around a form and dried; the ends are tapered, overlapped with adhesive and stitched with cherry bark, and a base is fitted afterwards. Forms range from lunch boxes to trays and cups. The craft is designated a Traditional Craft of Japan. Source identity: Wikidata structured metadata, CC0 1.0; guide text from Ōdate Kōgeisha, Aoyama Square and Akita Prefecture accounts used by this site's editorial magewappa guide. Individual makers, products and prices are not listed.
- material
- Akita cedar, stitched with cherry bark
- technique
- Hot-water bending of thin cedar boards (magewappa)
- designation
- Traditional Craft of Japan, designated by the Minister of Economy, Trade and Industry
- maker
- Not supplied
- country Of Origin
- Japan · Wikidata Q17
- place Of Creation
- Ōdate, Akita Prefecture
- reference Type
- Craft-type metadata; not official designation, a product or a maker
Wikidata contributors · Structured CC0 metadata; selection/categories by GIZUMO